Roller Glider Assembly Instructions

1. Place base on ground (floor) and set wheels in place.

3. Place arm rest on seat support rail against back support but not on crossbrace. Put 3 screws on side.

4. Here is a closer picture of the previous picture.

5. Install 4 roof top supports to all four corners of the seat supports. Use two bolts to fasten to seat support.

6. Slide the seats into the seat supports.

7. Slide the folding table between the two seats.

8. Install the top roof to the corner supports. Having two people for this job makes this job easier.

9. Install top cover and fasten with velcro ties.

10. Congratulations, you are done.